Hunting Horse 20 Pc Chrome Spike Lug Nuts 9/16-18 for Dodge Ram 1994–2011, Solid 1 Piece 4.5" Tall Acorn Style with Special Design Key

<p><strong>Designed for vehicles with 9/16-18 thread pitch</strong></p> <p><strong>Features:</strong></p> <ul><li>Used for wheels with 60 degree tapered seating</li><li>Long lasting finish</li></ul> <p><strong>Specifications:</strong></p> <ul><li>Style: Closed-end</li><li>Seating： Acorn， 60 degree</li><li>Thread Sizes: 9/16"-18</li><li>Available Colors: Chrome, Black, Blue, and Red&nbsp;</li><li>Length: 112mm</li><li>Width: 22.8mm</li><li>Hex: 19mm</li></ul> <p>Please verify the size lug your vehicle uses before ordering.</p> <p><strong>The finish on this lug bolt is achieved through several different phases. Such as cold forged carbon steel with enhanced rigidity through heat treatment. This is the correct way to finish a wheel. They have a beautiful finish with a superior sheen due to the additional layer of clear coat.</strong></p> <p>COMPATIBILITY:</p> <ul><li>Buyers are responsible for choosing the correct thread, seat, and nut type for their application.</li><li>Please insure that your threaded stud length is at least 1/4" (6mm) shorter than the nut length listed above. Otherwise, you may need our extended model lug nuts.</li><li>Please insure that you are purchasing the correct lug nut model for your wheel seat type.</li><li>These nuts fits most factory wheels, but may or may not fit depending on your wheel. Please insure before purchase</li></ul> <p>&nbsp;</p> <p>The photograph does not depict the superior finish of the wheel.</p> <p><strong>Size and Pitch Chart</strong></p> <p>The pitch is measured by the distance between threads or the measurement of threads per inch for non-metric stud sizes. Below is a chart showing some of the popular car brands and models, as well as their respective thread size and pitch.</p> <p><strong>Make and Model</strong></p> <p><strong>Year</strong></p> <p><strong>Thread Size and Pitch</strong></p> <p>DAKOTA 2WD 4WD</p> <p>2005 - 2008</p> <p>9/16-18</p> <p>RAM 1/2 TON TRUCK 2 &amp; 4WD</p> <p>2002-on</p> <p>9/16-18</p> <p>RAM 3/4 TON TRUCK 2 &amp; 4WD</p> <p>1994-on</p> <p>9/16-18</p> <p>ECONOLINE E-250, E350 VAN</p> <p>1992-08</p> <p>9/16-18</p> <p>F250 &amp; F350 2WD, 4WD</p> <p>1988-1997</p> <p>9/16-18</p> <p>F250 &amp; F350 DUALLY 2WD, 4WD</p> <p>1988-1998</p> <p>9/16-18</p> <p>DUROCROSS</p> <p>2006-2008</p> <p>9/16-18</p> <p>Size and pitch measurements are in millimeters. The unit represents thread size by pitch size; therefore, F20 &amp; F350 cars from 1988 to 1998 have wheel nuts with 9/16", for example.</p> <p>&nbsp;</p>